LED Light Blubs HOME RESIDENTIAL CONTACT US TIPS AND HINTS HVAC COMMERCIAL WEATHERIZATION WINDOWS REBATES FINANCING ABOUT
706-629-0749
Rome | Cartersville | Dalton | Cedartown | Adairsville   John Anderson Service Co 519 Pine St, Calhoun, GA 30701                                (706) 629-0749
Energy Efficient Lighting
What are LEDs? LEDs, or light–emitting diodes, are semiconductor devices that produce visible light when an electrical current passed through them. LEDs are a type of Solid State Lighting (SSL), as are organic light–emitting diodes (OLEDs) and light–emitting polymers (LEPs).
LED Lighting
Basics of LED Lighting The useful life of LED lighting products is defined differently than that of other light sources, such as incandescent or CFL. This is because LEDs typically do not “burn out” or fail. Instead, they experience lumen depreciation, where the amount of light produced decreases and light color appearance can shift over time. Instead of basing the useful life of an LED product on the time it takes for 50% of a large group of lamps to burn out (as is the case with traditional sources), LED product “lifetime” is set based on a prediction of when the light output decreases 30 percent.
For a Energy Star Light blub purchasing guide. Click here 
CFL Lighting
How CFLs Work CFLs produce light differently than incandescent bulbs. In an incandescent, electric current runs through a wire filament and heats the filament until it starts to glow. In a CFL, an electric current is driven through a tube containing argon and a small amount of mercury vapor. This generates invisible ultraviolet light that excites a fluorescent coating (called phosphor) on the inside of the tube, which then emits visible light. CFLs need a little more energy when they are first turned on, but once the electricity starts moving, CFLs use about 70% less energy than incandescent bulbs. A CFL’s ballast helps "kick start" the CFL and then regulates the current once the electricity starts flowing. This entire process typically takes 30 seconds to 3 minutes to complete, which is why CFLs take longer than other lights to become fully lit. CFLs with decorative covers like globe or reflector shapes have a unique design challenge that results in the tradeoff of a slower warm up time, which is why these CFLs take longer than bare spirals to reach full brightness. Older CFLs used large and heavy magnetic ballasts that caused a buzzing noise in some bulbs. Most CFLs today — and all ENERGY STAR certified CFLs — use electronic ballasts, which do not buzz or hum.
Large CFL Bulb
Click to Enlarge
Check out this video from EnergyStar For helpful tips on light Blubs